A 3D printable Turkana Plains Modular Battleline Wall & Guard Tower scaled for 28mm - 40mm tabletop games. An ideal addition to the Turkana Plains Tower, Rocky Formations, the Turkana Plains Bunker and the Turkana Plains Sensor Tower.
Set includes a 50mm (2") straight wall, a 150mm (6") straight wall, and a 45 degree corner wall, all with corresponding battlement walkway. These pieces connect together using OpenLOCK clips to allow you to build very long sections of Battleline Wall.
Also included are set of clip-in rock pieces, and a guard tower with multiple options for upper through-doors allowing you to connect sections of Battleline Wall either side. The set also comes with a Guard Tower with the addition of a large removable gate.
The walkways are 55mm deep allowing you to place the majority of battleline infantry miniatures on it.
All print as FDM support-free pieces.
Renders pictured are example builds only.
Dimensions:
Temple Entrance - 196mm x 199mm x 178mm
Singlex1 Wall - 50mm x 44mm x 75mm
Main Wall - 150mm x 44mm x 75mm
Corner Wall - 65mm x 65mm x 75mm
Singlex1 Walkway - 50mm x 93mm x 35mm
Main Walkway - 150mm x 93mm x 35mm
Corner Walkway - 93mm x 93mm x 35mm
Guard Tower Lower - 99mm x 117mm x 78mm
Guard Tower Upper - 82mm x 123mm x 78mm
Guard Tower Roof - 75mm x 119mm x 8mm
Rock Center - 82mm x 199mm x 147mm
Rock End - 74mm x 125mm x 100mm
Rock End 2 - 97mm x 144mm x 75mm
Rock End 2 Walkway - 96mm x 105mm x 50mm
*** Important *** If using the Gate Guard Tower you will need to mirror the lower and upper parts of the tower in your slicer. Similarly, you can mirror the 45 corner and the rock end pieces.
Recommended FDM printing resolution - 0.2mm layer height. Supports not needed.
Everything is ready to throw into your slicer of choice and start printing.
