A scifi 3D printable set of Hope's Reach themed scatter and area terrain pieces. Ideal for 28mm - 35mm scale tabletop games like Deadzone, Grimdark Future.
Includes:
6 Rooftop AC Units
2 Roof Ducting Units
1 Generator
1 Shipping Container
3 Crates
Modular Pipeline
1 Water Tower with 4 lower variants & 2 upper variants
1 Fuel Tank with 2 endcap variants
Water Tower has four lower variants - 1 with ladder access, 1 regular lower piece & 2 regular lowers with OpenLOCK ports for pipeline connections. Water Tower sections are 3" tall and connect using OpenLOCK clips.
Fuel Tank has the option of two endcaps - 1 regular & 1 with OpenLOCK ports for pipeline connections.
Designed to work the Hope's Reach Core Set buildings, Hope's Reach Landing Pad & the Hope's Reach Comms Tower
Dimensions:
AC Unit 1 - 35mm x 37mm x 18mm
AC Unit 2 - 112mm x 55mm x 50mm
AC Unit 3 - 31mm x 18mm x 15mm
AC Unit 4 - 35mm x 35mm x 37mm
AC Unit 5 - 20mm x 75mm x 20mm
AC Unit 6 - 30mm x 93mm x 17mm
Ducting 1 - 83mm x 22mm x 21mm
Ducting 2 - 104mm x 104mm x 21mm
Small Crate 1 - 27mm x 26mm x 25mm
Small Crate 2 - 42mm x 37mm x 27mm
Large Crate - 31mm x 50mm x 27mm
Shipping Container - 86mm x 125mm x 75mm
Generator - 78mm x 51mm x 52mm
Pipeline Section - 26mm x 26mm x 50mm
Pipeline Corner Curve - 28mm x 29mm x 26mm
Pipeline Corner Short - 26mm x 26mm x 22mm
Pipeline EndCap - 26mm x 23mm x 13mm
Pipeline Joiner - 27mm x 25mm x 26mm
Pipeline JoinerT - 27mm x 25mm x 26mm
Pipeline JoinerX - 28mm x 25mm x 26mm
Pipeline JoinerTanker - 38mm x 25mm x 74mm
Pipeline Turbine - 85mm x 51mm x 54mm
Tanker Endcap 1 - 76mm x 76mm x 24mm
Tanker Endcap 2 - 76mm x 76mm x 27mm
Tanker Mainbody - 77mm x 77mm x 150mm
Tanker Undersupport - 55mm x 141mm x 28mm
Water Tower Lower 1 - 125mm x 112mm x 75mm
Water Tower Lower 2 - 125mm x 112mm x 75mm
Water Tower Lower 3 - 125mm x 100mm x 75mm
Water Tower Lower 4 - 125mm x 100mm x 75mm
Water Tower Upper 1 - 135mm x 133mm x 75mm
Water Tower Upper 2 - 86mm x 86mm x 75mm
Water Tower Top 1 - 82mm x 82mm x 18mm
Water Tower Top 2 - 101mm x 101mm x 20mm
Recommended printing resolution - 0.2mm. All files can be printed on a 200mm x 200mm FDM print bed. No supports required.
Everything is ready to throw into your slicer of choice and start printing.
