Corvus Games Terrain 3D printable Trench Wars Trenchsides for 28mm - 32mm scifi tabletop wargaming

Trench Wars Trenchsides Digital STL 3D printable

€7.00
/
Shipping calculated at checkout.

This set of 28mm - 32mm scale modular Trenchsides gives you sections of trench to add to your scratch-built pieces. Included are six 6" inch, six 3" and five 2" wide trenchsides. Plus four short sections of trench platform 'fronts' for adding to your scratch-built fire steps.

These all print flat for faster printing and without the need for supports. Roughly 60mm tall (posts) when standing allowing for building 2" tall trenches with a small portion standing above the rough ground behind.

Dimensions:

6" Side01 - 60mm x 150mm x 5mm
6" Side02 - 60mm x 149mm x 4mm
6" Side03 - 63mm x 149mm x 4.5mm
6" Side04 - 61.5mm x 150mm x 4mm
6" Side05 - 60mm x 150mm x 4mm
6" Side06 - 61mm x 150mm x 5.5mm

3" Side01 - 60mm x 75mm x 4mm
3" Side02 - 60mm x 75mm x 4mm
3" Side03 - 60mm x 75mm x 4mm
3" Side04 - 60mm x 75mm x 4mm
3" Side05 - 60mm x 75mm x 4mm
3" Side06 - 60mm x 75mm x 4mm

2" Side01 - 62.5mm x 50mm x 5.5mm
2" Side02 - 60mm x 50mm x 4mm
2" Side03 - 60mm x 50mm x 4mm
2" Side04 - 60mm x 50mm x 4mm
2" Side05 - 67mm x 50mm x 5.5mm

Recommended printing resolution - 0.2mm. All files can be printed on a 200mm x 200mm FDM print bed. Supports not needed.
Everything is ready to throw into your slicer of choice and start printing.

Want the terrain but don’t have access to a printer? Then contact one of our highly rated and licensed printing partners. They print and ship from the US, Canada, EU, UK and Australia. They’ll happily print your new terrain set in the scale you need for your game — [Click the link below to find the printer closest to you]
Officially Licenced 3D Print Partners

You may also like

Recently viewed

Back to Trench Wars