This 3D printable House is part of the BahTwo range and is perfect for 28mm - 34mm sci-fi wargaming tables. Comprised of two large buildings linked by a 50mm wide walkway bridge.
Each building comes as four parts for quicker and easier printing. Each section is removable along with the doors, allowing you to place miniatures inside.
Building 1 Lower - 153mm x 159mm x 63mm Building 1 Upper A - 167mm x 167mm x 63mm Building 1 Upper B - 126mm x 138mm x 63mm Building 1 Roof - 116mm x 116mm x 53mm Building 1 Stairs - 131mm x 65mm x 63mm Bridge Walkway - 70mm x 150mm x 41mm
Building 2 Lower - 192mm x 144mm x 58mm Building 2 Upper A - 184mm x 142mm x 68mm Building 2 Upper B - 170mm x 127mm x 63mm Building 2 Roof - 115mm x 115mm x 67mm Building 2 Stairs - 172mm x 112mm x 58mm Building 2 Upper Stairs - 115mm x 44mm x 53mm
Assembled size: 483mm x 266mm x 247mm (19" x 10.5" x 9.7")
Recommended printing resolution - 0.2mm. All files can be printed on a 200mm x 200mm print bed. No need for supports*. Everything is ready to throw into your slicer of choice and start printing
* You may prefer to add manual supports to the insides of the doorframes, depending on how well your machine handles bridging.