Urban Groveham Town Bundle Digital STL 3D printable

€13.00

A 3D printable bundle of small town buildings scaled for 28mm, perfect for Fallout, Last Days, The Walking Dead All Out War and Marvel Crisis Protocol.
Contains five unique buildings and a separate Water Tower that can be used individually or as a set creating a fun small town street environment to fight around.

Each building prints as multiple parts ensuring faster printing, and comes with the option of drop-in floors allowing for interior play. The five buildings are the Small Store, the Restaurant, the Bank, the regular store and the Corner Store..
Each model also comes with an optional drop-in internal floor allowing for interior gameplay. Perfect for recreating a small town setting such as Woodbury in The Walking Dead.

Comes with a separate multi-part Water Tower for that added small town feel!

When printing to be compatible with Marvel Crisis Protocol, scale to approximately 126%. Check the dimensions below to ensure the pieces will fit your bed.

Dimensions:

Building A Small Store Lower - 110mm x 122mm x 59mm
Building A Small Store Upper -  110mm x 143mm x 40mm
Building A Small Store Roof -109mm x 119mm x 27mm

Building B Restaurant Lower - 144mm x 172mm x 87mm
Building B Restaurant Upper - 146mm x 158mm x 87mm
Building B Restaurant Roof - 143mm x 113mm x 15mm

Building C Corner Store Lower - 151mm x 136mm x 84mm
Building C Corner Store Upper - 151mm x 127mm x 65mm
Building C Corner Store Roof - 152mm x 128mm x 14mm

Building D Bank Lower - 192mm x 148mm x 85mm
Building D Bank Upper - 192mm x 148mm x 85mm
Building D Bank Roof - 203mm x 152mm x 28mm

Building E Store Lower - 118mm x 107mm x 89mm
Building E Store Roof - 117mm x 111mm x 28mm

Water Tower Base - 87mm x 94mm x 100mm
Water Tower Upper - 80mm x 84mm x 109mm
Water Tower Cylinder - 103mm x 103mm x 73mm

Recommended printing resolution - 0.2mm but some smaller details will work better at 0.1mm.   Supports not needed* Water Tower cylinder might benefit from minimal on-bed supports depending on printer's bridging settings.
Everything is ready to throw into your slicer of choice and start printing.

You recently viewed

Clear recently viewed