This massive 3D printable International Airport is compatible with 28mm - 40mm modern/urban game systems and comprises a main modular building, control tower and passenger boarding bridge. Also included are a number of small thematic scatter items along with a baggage tug vehicle and an aircraft tug vehicle.
The main building is made up of a number of hollow sections that connect together using OpenLOCK clips. The sides of the building clip on allowing you to create an airport terminal building as large as you need just by printing and clipping in extra sections. The front overhanging roof structure and front signage also OpenLOCK clip into the main building.
The assembled 3 section main building shown in the renders measures 550mm x 387mm x 324mm (21.6" x 15.2" x 12.75") The assembled Control Tower measures 184mm x 184mm x 379mm (7.2" x 7.2" x 14.9")
For scaling reference - Height of the main doors is 42.5mm
Scatter pieces included that will require glue as follows: Tug -> wheels Baggage Tug - wheels Seating Canopy/Shelter
Main Building Lower Front - 172mm x 141mm x 75mm Main Building Lower Back - 172mm x 94mm x 72mm Main Building Middle Front - 172mm x 196mm x 91mm Main Building Middle Back - 172mm x 91mm x 91mm Main Building Upper Front - 172mm x 83mm x 135mm Main Building Upper Back - 172mm x 187mm x 135mm Main Building Roof A - 172mm x 85mm x 24mm Main Building Roof B - 172mm x 188mm x 30mm
Control Tower Lower - 153mm x 153mm x 56mm Control Tower Upper - 155mm x 155mm x 198mm Control Tower Top - 184mm x 184mm x 115mm Control Tower Roof - 134mm x 134mm x 7mm
Passenger Bridge Long Section - 62mm x 160mm x 62mm Passenger Bridge Short Section - 100mm x 82mm x 62mm Passenger Bridge End Section - 100mm x 76mm x 102mm Passenger Bridge Support Strut - 80mm x 164mm x 21mm
Recommended printing resolution - 0.2mm. FDM Supports not required for the majority of this set, however supports are recommended for the Aircraft Tug vehicle body. Everything is ready to throw into your slicer of choice and start printing