Pilgrim City House 'E' Digital STL 3D printable

€10.00

The dwelling is designed as part of our Pilgrim City range, and fits with the existing Pilgrim City BundlePilgrim City Commerce Guild and the Pilgrim City Junk Dealers Corral to form a massive piece of gaming terrain ideal for creating the ancient streets of the holy city.

Split into three distinct structures that can form one single building, and includes steps to access the upper floors of two taller buildings. Also equipped with ladders allowing your units to access to elevation. Removable doors and roofs allow access to the inside of the buildings. A selection of cargo scatter terrain is included to add interest to your table.

Comes with an optional side entrance archway that can be attached with OpenLOCK clips. Also comes with an optional raised storage area with arches underneath. A total of 25 files included.

Dimensions:

Building A Lower - 158mm x 197mm x 68mm
Building A Upper - 177mm x 195mm x 71mm
Building A Roof - 137mm x 191mm x 39mm
Building A Steps - 66mm x 186mm 65mm

Building B Lower - 144mm x 127mm x 68mm
Building B Upper - 140mm x 123mm x 34mm

Building C Lower - 166mm x 84mm x 72mm
Building C Upper - 145mm x 89mm x 66mm
Building C Roof - 140mm x 75mm x 24mm

Archway - 22mm x 110mm x 65mm

Storage Area Double Arches - 22mm x 171mm x 108mm
Storage Area Roof - 110mm x 171mm x 43mm

No need for supports. Recommended printing resolution - 0.2mm. 
Everything is ready to throw into your slicer of choice and start printing

You recently viewed

Clear recently viewed